pump you can buy. This half bathroom macerator combines the proven pumping capability
of the Saniflo 1/2 hp pump/cutting system with the easy access panels
which provide customers the ability to easily clear an item that may
be accidentally flushed.
Don’t make a mistake by buying elsewhere, we set the standard when it comes to selling Saniflo.
We Know Saniflo! is not just our slogan, it is the reality.
* New 3 Year Warranty, ask us for details or help registering your system. *
This listing includes:
Saniflo Part#: 081 SaniAccess 2 Upflush/Macerator Pump 1/2 Bath Only
087 & 005 Saniflo Elongated Bowl & Saniflo Tank
Free Saniflo Slow Close Toilet Seat
Condition: New Factory Sealed, Factory Authorized Dealer, In Stock Ships Same Day
Warranty: 2 Yr base, 3 Yr if you register w/Saniflo when installed
The best Pre & Post Sales Support by The SanifloStore: Erin or Mark are always available to help our customers 866-658-0505
We are experts on the Saniflo Systems and can help you design your new bathroom.
our units are in stock and ship from our facility in Southern NH,
you live locally you are welcome to pick up and save even more.
We also have a great video of a Saniflo system you can check out on our Facebook page or at this link;https://youtu.be/2lwXGlD7KdE
We Know Saniflo!
The Saniflo Saniaccess2 is a system that is used to install a half bathroom
up to 15 feet below the sewer line, or even up to 150 feet away from a
soil stack. It can handle the effluent from a toilet and sink.
The Saniflo Saniaccess2 is simplicity itself to install; there are just four connections.
- The macerator/pump is connected to the spigot of a horizontal rear discharge toilet.
- The toilet tank is connected to the water supply.
- The macerator/pump is connected to the small diameter discharge pipe work.
- The macerator/pump is connected to the electrical supply.
The inside of the unit comprises of a pressure chamber, which starts
and stops the unit, and the motor, which drives the stainless steel
macerator blades and the pump.
When the flush is activated, the water flowing into the Saniaccess2
activates a micro switch in the pressure chamber, which in turn starts
the motor. The motor is sealed for life in an oil filled enclosure. A
common spindle/shaft drives the impeller and the macerator blades. The
moving parts therefore are kept to an absolute minimum. Water and
organic waste matter enter the chamber and are reduced to slurry as the
macerator blades rotate at 3600 RPM. The centrifugal force causes the
reduced solids to be ejected through a grill into the container where it
is picked up by the impeller pump mounted beneath the motor. The unit
pumps the effluent upward to 15 feet and/or 150 feet horizontally (with
gravity fall). Once the water level in the container goes down, the
micro switch deactivates the unit until the flush is activated again. A
normal operating cycle for Saniaccess2 takes about 10 – 15 seconds
depending upon the discharge pipe run configuration; power consumption
is therefore minimal.
In addition to the toilet waste, the Saniaccess2 will also discharge
gray water from a sink. The wastewater will drain into the system via a
1-1/2” inlet which is located on the side of the pump housing. Note
that either side connection can be used for the vent or as an inlet.
The discharge elbow on top of the unit can be turned either to the left,
to the right, or towards the back, depending on the discharge
installation. A non-return valve, which comes already assembled on the
discharge elbow, prevents back flow into the unit.
This unit has been designed with a 1-1/2” vent connection on the side
of the pump housing. All plumbing codes require connection to a vent
system. Please note that the vent system should be a two-way air vent.
The use of mechanical vents, air admittance valves or similar devices
are not permitted as these are considered one-way air vent systems. It
is also highly recommended for the macerator/pump to be connected to a
Ground Fault Interrupter (GFI) circuit.
Periodic maintenance can be accomplished easily without having to
disconnect the unit from either the toilet or the rest of the plumbing
system. Through one service panel, a service contractor can access the
electrical components as well as the level sensor mechanism of the
pump. The second service panel provides ready access to the basket area
around the macerating blades for easy removal of any large objects that
may have been accidentally flushed.
The Saniaccess2 unit must be connected to our rear discharge toilet.
This system uses much less water than a regular toilet. Note: This
toilet only works in combination with Saniflo systems.
The Saniaccess2 has been certified to American and Canadian
Standards. Macerating standard; US: CSA Certified & IAPMO (UPC)
listed – ASME A112.3.4, CA: Macerating Standard CSA B45.9.
All items may be purchased separately.
However, the Saniaccess2 works as a system and therefore a toilet bowl
(083 or 087), toilet tank (005) and the macerating unit (081) need to be
purchased. An optional extension pipe (030) is available for the pump
to be installed behind the wall.
- Items are usually shipped the same day if the
payment is made by 3pm EST
- We ship via Fed Ex and USPS. Tracking
information is always sent to your email address. Please check any spam
filters as it may end up there.
- If you need a package overnighted or expedited
let us know. Please notify us prior to payment so we can invoice
you for the additional charges.
- International buyers are responsible for all
tariffs, duties, taxes, fees and Vats. Customs forms will be completed in
accordance with US law.
- We can only ship to confirmed Paypal
- If paying by Paypal, please do not send payment
until your Paypal address is confirmed.
- You are more then welcome to save on shipping
and pick your items up at our facility during business hours M-F 9-4.
Please contact us for directions.
- We will combine shipping for multiple
- Large ticket items will ship with signature
- Items are described to the best of our ability,
if you have a question about an item please do not hesitate to ask.
- If you have a specific question on the use and
or installation of an item, please refer to the manufacturer’s website.
- If you have zero feedback, please contact us
before bidding on or buying an item.
- Please know exactly what you are buying. On
every listing we will include the manufacturer’s part number. Please do
whatever research you need to on the respective parts before purchasing.
- Please do not purchase something unless you
intend on paying for it.
- Please read all the policies, conditions,
additional terms of sale, etc. prior to bidding/buying.
- If an item is posted for an auction please do
not ask for a Buy It Now price.
- Please contact us in advance with any
questions, our (toll free) number is 866-658-0505
- Payment is expected within 5 days
of auction’s close or Buy It Now.
- Paypal is our preferred payment method.
- Credit Cards are accepted and must be
called in to our office between 10am – 4pm EST, Monday –
- Wire transfers are accepted, please contact
us for more information if you would like to pay via wire transfer.
- Cash for pick ups at our location is OK,
but please have exact cash on hand.
- If an item is received by you as not working,
damaged from transit, not as described, etc. please contact us
- Returned items must be approved and must
accompany the Return Authorization Number (RMA#) we provide.
- If an item is defective a replacement will be
shipped when the defective item is received back to us.
- If a replacement is not available, a refund
will be granted when the defective item is received back to us.
Unauthorized returns, or items returned for reasons other than
defect, damage or inaccurate description are subject to 15% restocking fee plus
any shipping costs that we incurred shipping the items to you